12V to 48V Multi-functional Battery indicator Hour Meter for Club Car Star Car

Description

Runleader 12V to 48V RL-BI022 Battery Discharge Gauge use to lead-acid,GEL ,Lithium iron phosphate(LiFePO4),“Trojan”,AGM,18650 lithium batteries;Display battery capacity status with 10 segments of LED Bar Graph. This fuel gauges can be used to monitor DC powered equipment such as fork lifts, golf carts, floor care equipment, and any other battery powered equipment.
1 Battery States indicator----10-Bar LED indicates different states of the battery
10-bar LED displays state-of-charge
Bar by bar display the battery state-of-charge ,from full to empty
2 Digital Maintenance Hour Meter----hour meter, service timers,hour meter initial time setting;
Hour Meter (TOT): Help you track how many hours you put on your engine.
Total Hours reading displays from 0 to 99,999 Hours, 0.1 hours accuracy,TOT hours are non-resettable.
Service timers : Countdown tracking time, Reminding maintenance, Like Air filter Replacement
You can program a start hours (old hour meter data) to replace an old hour meter
3 This gauge provides 9 types discharge curves for you to choose from.
Lead-acid batteries,GEL batteries,Lithium iron phosphate batteries (LiFePO4),“Trojan” new batteries,AGM batteries,18650 lithium batteries;
Voltage range:12V to 48V
This table uses a 12V battery. The voltage range of 24V 36V 48V is multiplied by 2 or 3 or 4 at a voltage of 12
When U-24 or U-36 or U-48 is selected, the measured voltage value will change automatically.
4 Set the warning voltage value
The warning voltage contains high voltage warning and low voltage warning
After setting the warning voltage value, the Alarm indicator light will light up and display green
when the warning value is reached, the Alarm indicator light will turn red and flash to remind
If the warning voltage value is not set, the Alarm indicator light will not light up